4 Perform a Test
4.7 Fast DOW capacitive couplig clamp
1
2
3
1 Generator
All the equipment including generator and EUT must be placed on a ground reference plane. The
generator earth bar on the frontpanel must be connected with the ground reference plane.
Select the Fast DOW test and the CN-EFT1000 as coupling device.
A missing coupling device in the parameter list can be added in the generator main menu.
2 Coupling Clamp
Connect the CN-EFT1000 coupling clamp with a 2m HV-BNC cable to the direct Fast DOW
output of the generator.
3 EUT
Place the cable to the EUT in the capacitive coupling clamp.
Page 27/55
To Next Page
Loading...