EMC VNX Series Installation Guide

CHAPTER 8
Setup
After you have completed all of the installation steps, continue to set up your system by
performing these post-installation tasks:
l
Connect a management station............................................................................. 80
l
Initialize your storage system................................................................................ 80
l
Update the storage system software and register your system............................... 82
l
Check system events.............................................................................................83
l
Configure servers for VNX systems.........................................................................84
l
Provision storage.................................................................................................. 84
l
Attach bezels........................................................................................................ 84
Setup
79

EMC VNX Series Specifications

General

Management Interface	Unisphere
Drive Support	SAS, NL-SAS, Flash (SSD)
RAID Levels	RAID 0, 1, 3, 5, 6
Protocols Supported	Fibre Channel, iSCSI, NFS, CIFS
Data Services	Deduplication, Compression, Snapshots, Replication
Processor	Intel Xeon
Operating System	VNX Operating Environment (block), VNX File Operating Environment (file)