i
User Instructions
MAN-02-04-60-0350-EN Rev. 3
Table of Contents
February 2019
Table of Contents
Table of Contents
Section 1: Introduction
Section 2: General
2.1 Actuator Overview ........................................................................................ 3
2.2 Serial Number and Type Label ....................................................................... 5
2.3 Operating Mode ............................................................................................ 5
2.4 Protection Class ............................................................................................ 6
2.5 Mounting Position ......................................................................................... 6
2.6 Direction of Rotation ..................................................................................... 7
2.7 Protection Devices ........................................................................................ 8
2.8 Ambient Temperature ................................................................................... 8
2.9 Delivery Condition of the Actuators .............................................................. 9
2.10 Information Notice (Tag) ............................................................................... 9
Section 3: Packaging, Transport and Storage
3.1 General ....................................................................................................... 10
3.2 Storage ....................................................................................................... 10
3.3 Long-term Storage ...................................................................................... 11
Section 4: Assembly and Disassembly of Linear Units on Valves
4.1 Security and Assembly Instructions ............................................................. 12
4.2 Mechanical Connection ............................................................................... 13
4.3 Disassembly ................................................................................................ 13
4.4 Mounting Postion of the Operating Unit ...................................................... 14
4.5 Electrical Connection .................................................................................. 15
Section 5: Commisioning
5.1 General ....................................................................................................... 18
5.2 Manual Operation ....................................................................................... 18
5.3 Mechanical Default Settings and Preparation .............................................. 18
5.4 End Limit Setting ......................................................................................... 18
5.5 Final Step .................................................................................................... 25
Section 6: Control Unit
6.1 Operating Unit ............................................................................................ 26
6.2 Display Elements ......................................................................................... 27
6.3 Operation ................................................................................................... 29
To Next Page
Loading...
