Emerson Bettis RTS CL Series User Manual

February 2019
User Instructions
MAN-02-04-60-0350-EN Rev. 3
59
Section 7: Parameter Menu
Parameter Menu
7.17 Parameter Group: Identification (option)
This option allows entering further custom-identication parameters
Table 24. Identification Parameter Group
Menu Item
Sub Menu
Item
Poss.
Setting
Notes / Comments
P18.1 Identication PPS number 15-digit
Used to enter a PPS number. This is displayed in the
bottom line. CAUTION: point P20.5 must be set to 0.
7.18 Parameter Group: System Parameters (locked)
Used for actuator conguration and not available for customers
7.19 Parameter Group: Miscellaneous
Table 25. Miscellaneous Parameter Group (1)
Menu Item
Sub Menu
Item
Poss.
Setting
Notes / Comments
P20.1 Miscellaneous Language
0: German
Denes the menu language
1: English
2: Russian
3: Czech
4: Spanish
5: French
6: Italian
7: Danish
8: Hungarian
9: Turkish
10: Greek
11: Polish
12: Serbian
13: Croation
P20.2 Miscellaneous Smartcode Enables additional features by entering a Smartc
P20.3 Miscellaneous Restore para
0: no action
1: Custpara -
By saving this setting, all parameters except the end
positions are reset to the customer parameters
2: Custpara +
By saving this setting, all parameters are reset to the
customer parameters
3:
Backuppara -
By saving this setting, all parameters except the end
positions are reset to the factory settings
4:
Backuppara +
By saving this setting, all parameters are reset to the
factory settings

Emerson Bettis RTS CL Series Specifications

General

Brand	Emerson
Model	Bettis RTS CL Series
Category	Controller
Language	English