Emerson Bettis RTS CL Series - Section 10: Bluetooth Link

User Instructions
MAN-02-04-60-0350-EN Rev. 3 February 2019
66
Section 10: Bluetooth Link
Bluetooth Link
Section 10: Bluetooth Link
In addition to the infrared interface, it is also possible to congure the Control System using
a Bluetooth interface. Software required for Android equipment is available as an option.
In addition to communication with the actuator, the Android software also enables
management of multiple actuators, allowing easy transfer of parameter sets to
various actuators.
This approach can simplify commissioning signicantly.
When the Bluetooth interface is enabled, this is indicated by the light-emitting diode L5
(see Figure 62). The Bluetooth interface can be enabled in menu item P20.6.