February 2019
User Instructions
MAN-02-04-60-0350-EN Rev. 3
25
Section 5: Commissioning
Commissioning
Figure 28 Selector Setting Display (2)
5.4.2 End limit CLOSE
Use menu item "P 1.2 End limit - End limit CLOSE" as for End limit OPEN
5.5 Final Step
Following commissioning, check for proper sealing the covers to be closed and cable inlets.
(see Section 2.4) Check actuator for paint damage (by transport or installation) and repair
if necessary.
To Next Page
Loading...
