Emerson Bettis RTS CL Series - Operation

February 2019
User Instructions
MAN-02-04-60-0350-EN Rev. 3
29
Section 6: Control Unit
Control Unit
6.3 Operation
The actuator is operated via the switches located on the controller (selection- and control
switch). All actuator settings can be entered with these switches. Furthermore, conguration
is also possible via the IR interface or the Bluetooth Interface (see Section 10). Flip the switch
up or down to regulate the parameter menu scrolling speed.
Figure 33 Neutral Position
Figure 34 Slight Switch Flip (It Will Move to the Next Parameter)
Figure 35 Halfway Switch Flip (Jump to the Next Parameter Category)