3. Type a name of the backup file, and then select Save.
Now the transmitter configuration is stored.
7.9.7 Upload a backup configuration to device
To upload a backup configuration using Rosemount Radar Master:
Procedure
Select Device → Upload Config to Device.
7.9.8
View backup files
The backup file can be viewed by using the Backup File Reader which is installed with the
Rosemount Radar Master software.
Procedure
Click the Start button, and then select All Programs → Rosemount → Radar Master Tools
→ Backup File Reader.
The backup file can also be viewed as a text file in a word processing program such as the
Notepad.
See also Open the configuration report for further information on viewing backup files.
Reference Manual Service and troubleshooting
00809-0100-4530 April 2019
Reference Manual 215
To Next Page
Loading...
