Option Description
Hex Display values in hexadecimal (Hex) format.
4. In the View Holding Registers window, do one of the following:
• To search for registers by name, select the Names checkbox, and then in the list,
select the desired register group.
• To search for registers by entering the register number, select the Numbers
checkbox, and then type the desired register number and the number of
registers to read.
5. Select Read.
6. To change a holding register value, type a new value in the corresponding value
field.
Some holding registers can be edited in a separate window. In this case, you can
change individual data bits.
7. Select Store to store the new value.
Figure 7-27: Holding and Input Registers Can Be Viewed in Rosemount Radar
Master
Service and troubleshooting Reference Manual
April 2019 00809-0100-4530
222 Rosemount 5300 Level Transmitter
To Next Page
Loading...
