Emerson Rosemount 5300 Series - Page 339

Table A-27: Rosemount 5303 Level for Solids Ordering Information (continued)
JA DN100, PN16, Type A flat face ★
JB DN100, PN40, Type A flat face ★
HI DN50, PN40, Type E spigot face
HP DN50, PN16, Type C tongue face
HQ DN50, PN40, Type C tongue face
IH DN80, PN16, Type E spigot face
II DN80, PN40, Type E spigot face
IP DN80, PN16, Type C tongue face
IQ DN80, PN40, Type C tongue face
JH DN100, PN16, Type E spigot face
JI DN100, PN40, Type E spigot face
JP DN100, PN16, Type C tongue face
JQ DN100, PN40, Type C tongue face
KA DN150, PN16, Type A flat face
JIS flanges
(9)
UA 50A, 10K, RF (Raised Face Type) ★
VA 80A, 10K, RF (Raised Face Type) ★
XA 100A, 10K, RF (Raised Face Type) ★
UB 50A, 20K, RF (Raised Face Type)
VB 80A, 20K, RF (Raised Face Type)
XB 100A, 20K, RF (Raised Face Type)
YA 150A, 10K, RF (Raised Face Type)
YB 150A, 20K, RF (Raised Face Type)
ZA 200A, 10K, RF (Raised Face Type)
ZB 200A, 20K, RF (Raised Face Type)
Threaded connections
(8)
Probe type
RA 1½-in. NPT thread All ★
RC 2-in. NPT thread All ★
RB 1-in. NPT thread All
SA 1½-in. BSP (G 1½-in.) thread All
SB 1-in. BSP (G 1-in.) thread All
Hazardous locations certifications (see Product certifications)
NA No Hazardous Locations Certifications ★
E1 ATEX Flameproof ★
Reference Manual Specifications and reference data
00809-0100-4530 April 2019
Reference Manual 339