Emerson Rosemount 5300 Series - Page 345

Table A-28: Rosemount 5300 Series Spare Parts List - Transmitter Head (continued)
KH USA, Canadian, IECEx Intrinsic Safety
KI
(4)
FISCO - ATEX, USA, Canadian Intrinsic Safety
KJ
(4)
FISCO - ATEX, USA, IECEX Intrinsic Safety
KK
(4)
FISCO - ATEX, Canadian, IECEX Intrinsic Safety
KL
(4)
FISCO - USA, Canadian, IECEX Intrinsic Safety
N1 ATEX Type n
N7 IECEx Type n
Options (include with selected model number)
Display
M1 Integral digital display
Communication
HR7 4–20 mA with digital signal based on HART 7 protocol
Factory configuration
C1 Factory configuration (Configuration Data Sheet required with order, available at
Emerson.com/Rosemount)
Alarm limit configuration
C4 Namur alarm and saturation levels, high alarm
C5 Namur alarm and saturation levels, low alarm
C8
(5)
Low alarm (standard Rosemount alarm and saturation levels)
Special certifications
Q4 Calibration Data Certification
QG GOST Primary Verification Certificate
Safety certifications
QS Prior-use certificate of FMEDA Data. Only available with HART 4-20 mA output (output
code H).
QT Safety-certified to IEC 61508 with certificate of FMEDA data. Only available with HART
4-20 mA output (output code H).
Transient protection
T1 Transient Protection Terminal Block. Selectable with HART 4-20 mA output (output code
H). Already included in all FOUNDATION Fieldbus variations.
Diagnostic functionality
D01 FOUNDATION Fieldbus Diagnostics Suite (includes Signal Quality Metrics diagnostics)
DA1 HART Diagnostics Suite (includes Signal Quality Metrics diagnostics)
Cold temperature
BR5
(6)(7)(8)(9)(10)
-67 °F (-55 °C) cold temperature
Reference Manual Specifications and reference data
00809-0100-4530 April 2019
Reference Manual 345