Table A-29: Rosemount 5300 Series Spare Parts List - Probe (continued)
Consolidate to chamber (see Rosemount 9901 Chamber)
XC Consolidate to Chamber
Engineered solutions (see Engineered solutions)
Rxxxx Engineered Solutions beyond standard model codes. (Consult factory for details)
(1) Process seal rating. Final rating depends on flange and O-ring selection. See “Temperature and pressure limits” on
Process temperature and pressure rating, Flange rating, Tri-Clamp rating, and Plate design.
(2) Requires option None for sealing (no O-ring).
(3) For other materials, consult the factory.
(4) Requires High Temperature High Pressure (code H) or High Pressure (code P) probe.
(5) Only available for Probe Type code 3C.
(6) Consult factory.
(7) Only available with standard temperature and pressure (code S).
(8) Requires model 5301.
(9) Requires firmware version 2.L3 or later.
(10) Only available with Operating Temperature and Pressure code H.
(11) 0.79 lb (0.36 kg) standard weight for flexible single lead probe. L=5.5 in. (140 mm).
For PTFE covered probes: 2.2 lb (1 kg) standard weight for flexible single lead probe. L=17.1 in. (434 mm).
(12) Extra length for fastening is added in factory.
(13) Requires model 5303.
(14) Probe weight included if applicable. Give the total probe length in feet and inches or meters and centimeters, depending
on selected probe length unit. If tank height is unknown, please round up to an even length when ordering. Probes can
be cut to exact length in field. Maximum allowable length is determined by process conditions. See Total probe length
for more probe length guidance.
(15) Available for tank connection with flange.
(16) Weldings in accordance with EN/ISO standards.
(17) Certificate includes all pressure retaining wetted metal parts.
(18) Design and manufacturing according to ASME B31.1. No code stamp available. Welding in accordance with ASME IX.
(19) Only available with Material of construction code 1, Operating temperature and pressure code S, H, or P, together with
Probe type 3A, 3B, 3V, 4U, 4A, 4B, 4S, 5A, or 5B.
(20) Only and Probe type code 3V or 4U.
(21) Suitable for use as a level sensor part of a limiting device, in accordance with EN 12952-11 and EN 12953-9.
(22) For Probe Type 3A, 3B, 3C, 4A, 4B, 4S, and 4U, and PTFE-coated 5A.
(23) Not available with PTFE covered probes.
(24) Only available with HART 4-20 mA output (code H), standard operating temperature and pressure (code S), material of
construction (code 1), and flexible single lead probes (probe type 5A or 5B).
(25) Rosemount extended warranties have a limited warranty of three or five years from date of shipment.
(26) Available for SST, Alloy C-276, Alloy 400, and Duplex 2205 probes, type 2A, 4A, 4B, 4S, and 5A. Same disc material as
probe material. For more information, see Centering disc for pipe installations.
(27) Available for probe types 2A, 4A, 4B, 4S, and 5A. Not available with Operating Temperature and Pressure code H or
Material of Construction codes 7 and 8.
A.8.1
Accessories
Table A-30: Accessories Ordering Information
The starred options (★) represent the most common options and should be selected for best delivery. The non-starred
offerings are subject to additional delivery lead time.
Weight kit
03300-7001-0002 Weight kit flexible twin lead
Reference Manual Specifications and reference data
00809-0100-4530 April 2019
Reference Manual 355
To Next Page
Loading...
