Table F-2: Level Transducer Block Parameters and Descriptions (continued)
Parameter Index Number Description
MODE_BLK 5 The actual, target, permitted, and normal modes of the
block. Target: The mode to “go to” Actual: The mode
the “block is currently in” Permitted: Allowed modes
that target may take on Normal: Most common mode
for target
BLOCK_ERR 6 This parameter reflects the error status associated with
the hardware or software components associated with
a block. It is a bit string, so that multiple errors may be
shown.
UPDATE_EVT 7 This alert is generated by any change to the static data.
BLOCK_ALM 8 The block alarm is used for all configuration, hardware,
connection failure or system problems in the block.
The cause of the alert is entered in the subcode field.
The first alert to become active will set the Active
status in the Status parameter. As soon as the
Unreported status is cleared by the alert reporting task,
another block alert may be reported without clearing
the Active status, if the subcode has changed.
TRANSDUCER_DIRECTORY 9 Directory that specifies the number and starting
indices of the transducers in the transducer block.
TRANSDUCER_TYPE 10 Identifies the transducer.
XD_ERROR 11 A transducer block alarm subcode.
COLLECTION_DIRECTORY 12 A directory that specifies the number, starting indices,
and DD Item ID’s of the data collections in each
transducer within a transducer block.
RADAR_LEVEL_TYPE 13 Not used
RADAR_LEVEL 14 Level
RADAR_LEVEL_RANGE 15 See Table F-10
RADAR_ULLAGE 16 Distance (Ullage)
RADAR_LEVELRATE 17 Level Rate
RADAR_LEVELRATE_RANGE 18 See Table F-11
RADAR_LEVEL_SIGNAL_STRENGTH 19 Signal strength
RADAR_LEVEL_SIG-
NAL_STRENGTH_RANGE
20 See Table F-13
RADAR_VOLUME 21 Volume
RADAR_VOLUME_RANGE 22 See Table F-14
RADAR_INTERNAL_TEMPERATURE 23 Internal Temperature
RADAR_INTERNAL_TEMPERA-
TURE_RANGE
24 Range, unit and number of decimals
VOLUME_UPPER 25 The calculated volume value of the upper product at
the current level and interface
Reference Manual Level Transducer Block
00809-0100-4530 April 2019
Reference Manual 427
To Next Page
Loading...
