Table G-1: Register Access Transducer Block Parameters (continued)
Parameter Index Number Description
INP_REG_8_FLOAT 37 If the register contains a float value, it should be displayed here
INP_REG_8_INT_DEC 38 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
INP_REG_9_TYPE 39 Register type
INP_REG_9_FLOAT 40 If the register contains a float value, it should be displayed here
INP_REG_9_INT_DEC 41 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
INP_REG_10_TYPE 42 Register type
INP_REG_10_FLOAT 43 If the register contains a float value, it should be displayed here
INP_REG_10_INT_DEC 44 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
DB_REG_1_TYPE 45 Register type
DB_REG_1_FLOAT 46 If the register contains a float value, it should be displayed here
DB_REG_1_INT_DEC 47 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
DB_REG_2_TYPE 48 Register type
DB_REG_2_FLOAT 49 If the register contains a float value, it should be displayed here
DB_REG_2_INT_DEC 50 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
DB_REG_3_TYPE 51 Register type
DB_REG_3_FLOAT 52 If the register contains a float value, it should be displayed here
DB_REG_3_INT_DEC 53 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
DB_REG_4_TYPE 54 Register type
DB_REG_4_FLOAT 55 If the register contains a float value, it should be displayed here
DB_REG_4_INT_DEC 56 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
DB_REG_5_TYPE 57 Register type
DB_REG_5_FLOAT 58 If the register contains a float value, it should be displayed here
DB_REG_5_INT_DEC 59 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
DB_REG_6_TYPE 60 Register type
DB_REG_6_FLOAT 61 If the register contains a float value, it should be displayed here
DB_REG_6_INT_DEC 62 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
DB_REG_7_TYPE 63 Register type
DB_REG_7_FLOAT 64 If the register contains a float value, it should be displayed here
Reference Manual Register Transducer Block
00809-0100-4530 April 2019
Reference Manual 439
To Next Page
Loading...
