Emerson Rosemount 5300 Series - Page 440

Table G-1: Register Access Transducer Block Parameters (continued)
Parameter Index Number Description
DB_REG_7_INT_DEC 65 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
DB_REG_8_TYPE 66 Register type
DB_REG_8_FLOAT 67 If the register contains a float value, it should be displayed here
DB_REG_8_INT_DEC 68 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
DB_REG_9_TYPE 69 Register type
DB_REG_9_FLOAT 70 If the register contains a float value, it should be displayed here
DB_REG_9_INT_DEC 71 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
DB_REG_10_TYPE 72 Register type
DB_REG_10_FLOAT 73 If the register contains a float value, it should be displayed here
DB_REG_10_INT_DEC 74 If the register contains a DWORD value, and dec is chosen, it should be
displayed here
RM_COMMAND 75 Used to set what will be read or write from a secondary master.
RM_DATA 76 Data read/write from secondary master.
RM_STATUS 77 Status read by a secondary master.
Register Transducer Block Reference Manual
April 2019 00809-0100-4530
440 Rosemount 5300 Level Transmitter