121
Reference Manual
00809-0100-4026, Rev HA
Section 6: Operation
November 2014
Operation
Using RRM
The LCD tab in the General window allows variables to be specified for view on the Display Panel
screen:
1. Choose the General option from the Setup menu, or click the General icon in the
Device Configuration window.
2. Select the LCD tab.
Figure 6-2. RRM lets you Specify Variables for the Rosemount 5400 Series Display Panel
3. Select the variables to appear on the Display Panel. The LCD will alternate between the
selected items.
4. Click the Store button to save the LCD display settings in the transmitter database.
Device Config
General
To Next Page
Loading...
