123
Reference Manual
00809-0100-4026, Rev HA
Section 6: Operation
November 2014
Operation
LCD display parameters
Table 6-1. LCD Display Parameters and Presentation on Display
Parameter
Presentation on
display
Description
Level LVL Product level.
Distance DST
Distance from the upper reference point to the
product surface.
Level Rate LR The speed of level movement up or down.
Signal Strength AMP The signal amplitude of the surface echo.
Volume
Only measurement unit
is shown.
Total product volume.
Internal Temperature ITEMP Temperature inside the transmitter housing.
AOut Current ANOUT Analog Output 4 -20 mA current.
Percent of Range % RNG Level value in percent of total measurement range.
Comm Quality COM Q Digital communication signal quality.
To Next Page
Loading...
