Reference Manual
00809-0100-4731, Rev FA
April 2003
A-11
APEX
™
and APEX Sentry
™
Radar Gauge
Figure A-3. APEX Dimensional
Drawings (Repeated Drawing)
2.06
(52.3)
3.00
(76.2)
8.40
(213)
A
1.55 (39.4)
3
/4–14 NPT
Conduit
Connections(2)
B
D
5.50 (139.7)
7.50 (190.5)
6.50 (165.1)
E
C
M1 or M2 Integral
Display (Optional)
Dimensions are in inches (millimeters)
3095_14A, 3095_15A
TABLE 5. Dimensions (Table 3 of 3)
Flange Size Antenna Size
Dimensions in inches (millimeters)
A B C D E
DN 100, PN 40 2-inch 13.75 (349) 5.35 (136) 9.25 (235) 4.53 (115) 1.75 (44)
DN 100, PN 16 3-inch (original)* 14.35 (364) 5.96 (151) 8.66 (220) 5.29 (134) 2.71 (69)
DN 100, PN 40 3-inch (original)* 14.35 (364) 5.96 (151) 9.25 (235) 5.14 (131) 2.71 (69)
DN 100, PN 16 3-inch (new)* 16.38 (416) 7.98 (203) 8.66 (220) 7.31 (186) 2.69 (68)
DN 100, PN 40 3-inch (new)* 16.38 (416) 7.98 (203) 9.25 (235) 7.16 (182) 2.69 (68)
DN 100, PN 16 4-inch 18.37 (467) 9.97 (253) 8.66 (220) 9.30 (236) 3.50 (89)
DN 100, PN 40 4-inch 18.37 (467) 9.97 (253) 9.25 (235) 9.15 (232) 3.50 (89)
DN 150 PN 16 2-inch 13.75 (349) 5.35 (136) 11.22 (285) 4.60 (117) 1.75 (44)
DN 150 PN 40 2-inch 13.75 (349) 5.35 (136) 11.81 (300) 4.37 (111) 1.75 (44)
DN 150 PN 16 3-inch (original)* 14.35 (364) 5.96 (151) 11.22 (285) 5.21 (132) 2.71 (69)
DN 150 PN 40 3-inch (original)* 14.35 (364) 5.96 (151) 11.81 (300) 4.98 (126) 2.71 (69)
DN 150 PN 16 3-inch (new)* 16.38 (416) 7.98 (203) 11.22 (285) 7.23 (184) 2.69 (68)
DN 150 PN 40 3-inch (new)* 16.38 (416) 7.98 (203) 11.81 (300) 7.00 (178) 2.69 (68)
DN 150 PN 16 4-inch 18.37 (467) 9.97 (253) 11.22 (285) 9.22 (234) 3.50 (89)
DN 150 PN 40 4-inch 18.37 (467) 9.97 (253) 11.81 (300) 8.99 (228) 3.50 (89)
* Gauges with 3-inch antennas and serial number 3925 or higher have the 3-inch antenna length labelled “new.”