Endress+Hauser cerabar S - Sensor Data

Description of parameters (ToF Tool) Cerabar S/Deltabar S
140 Endress+Hauser
MAT. PROC. CONN. +
Selection
For selecting and displaying the material of the process connection (P+).
→ See also parameter description for MAT. PROC. CONN. -
Options:
•Not used
•Unknown
• Special
• Steel
• 304 st. steel
• 316 st. steel
• Alloy C
•Monel
•Tantalum
• Titanium
•PTFE (Teflon)
• 316L st. steel
•PVC
•Inconel
•PVDF
•ECTFE
Factory setting:
As per order specifications
MAT. PROC. CONN. -
Selection
For selecting and displaying the material of the process connection (P–).
→ See also parameter description for MAT. PROC. CONN. +
Prerequisite:
• Deltabar S differential pressure transmitter
SEAL TYPE
Selection
For selecting and displaying the material of the process seal.
Options:
•Not used
•Unknown
• Special
• FKM Viton
•NBR
•EPDM
•Urethane
•IIR
•Kalrez
• FKM Viton oxyg
•CR
•MVQ
•PTFE glass
•PTFE graphite
• PTFE oxygen
• Copper
• Copper f. oxygen
Factory setting:
As per order specifications
ToF Tool, Table 20: OPERATING MENU → TRANSMITTER INFO → SENSOR DATA (all measuring modes)
Parameter name Description
SENSOR SER. No.
Display
Displays the serial number of the sensor (11 alphanumeric characters).
PRESS. SENS LOLIM
Display
Displays the lower measuring limit of the sensor.
PRESS. SENS HILIM
Display
Displays the upper measuring limit of the sensor.
MINIMUM SPAN
Display
Displays the smallest possible span.
ToF Tool, Table 19: OPERATING MENU → TRANSMITTER INFO → PROCESS CONNECTION
Parameter name Description