Endress+Hauser cerabar S - Page 165

Cerabar S/Deltabar S Appendix
Endress+Hauser 165
P01-xMx7xxxx-19-xx-xx-xx-045
*
*
*
TAG_DESC
DEVICE NAME STR.
MESSAGE
MANUFACTURER ID
TRANSMITTER INFO
INFO TRANSMITTER DATA
DEVICE SERIAL No
ELECTR. SERIAL No
ADDITIONAL INFO
HARDWARE REV.
SOFTWARE VERSION
CONFIG RECORDER
PCB TEMPERATURE
ALLOWED MIN. TEMP
ALLOWED MAX. TEMP
DIP STATUS
PROCESS CONNECTION
SEAL TYPE
Pmax PROC. CONN.
MAT. PROC. CONN. +
MAT. PROC. CONN. –
PROC. CONN. TYPE
SENSOR DATA
SENSOR MEAS. TYPE
Pmin SENS. DAMAGE
SENSOR SER. NO.
PRESS. SENS HILIM
MINIMUM SPAN
Pmax SENS. DAMAGE
MAT. MEMBRANE
PRESS. SENS LOLIM
FILLING FLUID
Tmin SENSOR
Tmax SENSOR
SENSOR H/WARE REV.
MEASURED VALUE
PROCESS VALUE
PROCESS INFO
Pressure
Level Flow
PEAK HOLD INDICATOR
COUNTER:T > Tmax
MAX. MEAS. TEMP.
COUNTER:T< Tmin
MIN. MEAS. TEMP.
COUNTER:P > Pmax
MAX. MEAS. PRESS.
COUNTER:P < Pmin
MIN. MEAS. PRESS.
PCB COUNT:T > Tmax
PCB MAX. TEMP.
PCB COUNT: T< Tmin
PCB MIN. TEMP.
RESET PEAKHOLD
SENSOR TEMP.
MEAS. VAL. TREND
PRESSURE
CORRECTED PRESS.
SENSOR PRESSURE
LEVEL BEFORE LIN
TANK CONTENT
MEAS. VAL. TREND
PRESSURE
CORRECTED PRESS.
SENSOR PRESSURE
SENSOR TEMP.
MEAS. VAL. TREND
PRESSURE
CORRECTED PRESS.
SENSOR PRESSURE
SENSOR TEMP.
TOTALIZER 2
SUPPRESSED FLOW
TOTALIZER 1
TOTAL. 1 OVERFLOW
TOTAL. 2 OVERFLOW
MEASURED VALUE MEASURED VALUE
DEVICE DESIGN
Deltabar S only
There are parameters that are only displayed if other parameters are
appropriately configured.
These parameters are indicated with a "*".