Endress+Hauser cerabar S - Page 29

Cerabar S/Deltabar S Description of parameters (FF configuration program)
Endress+Hauser 29
ELECTRONIC _SERIAL
_NUMBER/
ELECTR. SERIAL No.
Display
Index: 47
Data type: Float
Access: Read only
Displays the serial number of the main electronics (11 alphanumeric characters).
DEVICE_SERIAL_
NUMBER/
DEVICE SERIAL No.
Display
Index: 48
Data type: Float
Access: Read only
Displays the serial number of the device (11 alphanumeric characters).
PROCESS_CONNEC-
TION_MODEL/
PROC. CONN. TYPE
Selection
Index: 49
Data type: Unsigned16
Access: Auto, OOS
For selecting and displaying the process connection type.
Options:
•Not used
•Unknown
•Special
•Oval flange
• Thread female
•Thread male
•Flange
•Remote seal
PROCESS_CONNEC-
TION_MATERIAL_
POSITIVE/
MAT. PROC. CONN. +
Selection
Index: 50
Data type: Float
Access: Auto, OOS
For selecting and displaying the material of the process connection (P+).
→ See also parameter description MAT. PROC. CONN. –
Options:
•Not used
•Unknown
•Special
• Steel
• 304 st. steel
• 316 st. steel
• Alloy C
•Monel
•Tantalum
• Titanium
•PTFE (Teflon)
• 316L st. steel
•PVC
•Inconel
•PVDF
•ECTFE
Factory setting:
As per order specifications
PROCESS_CONNEC-
TION_MATERIAL_
NEGATIVE/
MAT.PROC. CONN.–
Selection
Index: 51
Data type: Float
Access: Auto, OOS
For selecting and displaying the material of the process connection (P–).
→ See also parameter description MAT. PROC. CONN. +
Resource Block
Parameter Description