Identification Gammapilot M FMG60 with FOUNDATION Fieldbus
12 Endress+Hauser
2.4 Scope of delivery
• Ordered version of the device (including Operating Instructions)
• Endress+Hauser operating program (on the CD-ROM supplied)
• Accessories as ordered
2.5 Supplied documentation
2.5.1 Operating Instructions (BA330F, this manual)
Describe how to install and commission the Gammapilot M (communication version
FOUNDATION Fieldbus). Those functions of the operating menu are included, which are required
for standard measuring tasks. Any additional functions are contained in the "Description of Device
Functions" (BA287F).
2.5.2 Description of Device Functions (BA287F, on CD-ROM)
Contains a detailed description of all the functions of the Gammapilot M and applies for all
communication versions. This document can be found as a PDF file on the CD-ROM supplied and
can be downloaded from the Internet under "www.de.endress.com" (→ download).
50 Scintillator measuring range
A NaI-Crystal 50x50mm
C NaI-Crystal 50x50mm + collimator radial
D NaI-Crystal 50x50mm + water cooling
G PVT 200mm
H PVT 200mm + water cooling
J PVT 400mm
K PVT 400mm + water cooling
L PVT 800mm
M PVT 800mm + water cooling
N PVT 1200mm
P PVT 1200mm + water cooling
Q PVT 1600mm
R PVT 1600mm + water cooling
S PVT 2000mm
T PVT 2000mm + water cooling
Y Special version, to be specified
60 Housing, Pipe; Operation
1 316L, 316L; Prepared for FHX40, remote display (accessory)
3 Alu, 316L; prepared for FHX40, remote display (accessory)
9 Special version, to be specified
70 Cable entry power supply
A Gland M20
B Thread M20
C Thread G1/2
D Thread NPT1/2
Y Special version, to be specified
80 Cable entry output
1 equal to supply (gland/thread)
2 Plug M12
3 Plug 7/8"
9 Special version, to be specified
90 Additional option
A Basic version
B SIL declaration of conformity (max limit switch)
Y Special version, to be specified
FMG60 - Product designation
To Next Page
Loading...
