Wiring Gammapilot M FMG60 with FOUNDATION Fieldbus
28 Endress+Hauser
4.10 Connecting the remote display and operation FHX40
For some Dust-Ex versions of the Gammapilot M, the FHX40 connector is protected by a metal
sleeve. This sleeve must be detached before connecting the FHX40 and reattached afterwards.
Tighten all Allen screws securely.
L00-FMG60xxx-04-00-00-xx-008
The remote display and operating unit FHX40 is
available as accessory. It is connected to the
FHX40-connector of the Gammapilot M via the
supplied cable. To do this, the housing of the
Gammapilot M needs not to be opened.
L00-FMG60xxx-04-00-00-xx-007
Gammapilot M
FHX40
To Next Page
Loading...
