Endress+Hauser Levelflex FMP53 - The Linearization submenu; Linearization type

Levelflex FMP51, FMP52, FMP54 Description of device parameters (operating menu)
Endress+Hauser 137
The "Linearization" submenu
Linearization type
Navigation
Setup ® Advanced setup ® Linearization ® Linearization type
Description
Defines the type of linearization
Selection
• None
The level is transmitted to the output without
linearization.
•
Linear (A)
• Table (B)
• Pyramid bottom (C)
• Conical bottom (D)
• Angled bottom (E)
• Horizontal cylinder (F)
• Sphere (G)
0%
100%
0%
100%
100%
0%
100%
0%
0%
100%
A
B
C/D
E
F/G
A0013299
Factory setting
None
Unit linearized
Navigation
Setup ® Advanced setup ® Linearization ® Unit linearized
Condition
Only visible if a linearization has been selected (i.e. Linearization type ¹ None)