Endress+Hauser Levelflex FMP53 - Page 139

Levelflex FMP51, FMP52, FMP54 Description of device parameters (operating menu)
Endress+Hauser 139
Factory setting
100
Diameter
Navigation
Setup ® Advanced setup ® Linearization ® Diameter
Condition
Only visible if one of the following linearization types has been selected:
•
Horizontal cylinder
• Sphere
Description
Definition of the tank diameter
Input range
0 ... 9999.999 m (32808 ft)
Factory setting
2 m (6.6 ft)
Additional information
The value must be specified in the selected distance unit (® ä 116).
Intermediate height
Navigation
Setup ® Advanced setup ® Linearization ® Intermediate height
Condition
Only visible if one of the following linearization types has been selected:
•
Pyramid bottom
• Conical bottom
• Angled bottom
Description
Definition of the intermediate height H
0%
H
A0013264
Input range
0 to 200 m (0 to 656 ft)
Factory setting
0 m (0 ft)
Additional information
The value must be specified in the selected distance unit (® ä 116).
Table mode