Description of device parameters (operating menu) Levelflex FMP51, FMP52, FMP54
156 Endress+Hauser
Additional information
The hexadecimal code give more detailed information on the device state than the Out status
parameter.
For the meaning of the hexadecimal code refer to BA00034S, "PROFIBUS DP/PA - Guidelines for
planning and commissioning".
"Analog output 1" ... "Analog output 4" submenus
The Analog output 1 to Analog oputput 4 submenus are used to configure the AO blocks of
the device.
Set point value
Navigation
Setup ® Advanced setup ® Analog output 1...4 ® Set point value
Description
Enter the set point for the AO block.
Range of values
Any IEEE floating point number:
-3,4 10
38
... +3,4 10
38
Factory setting
0
Set point status
Navigation
Setup ® Advanced setup ® Analog output 1...4 ® Set point status
Description
Enter the status byte for the set point of the AO block.
Range of values
0 to 255
Factory setting
0
Fail safe time
Navigation
Setup ® Advanced setup ® Analog output 1...4 ® Fail safe time
Description
Defines the fail-safe time, i.e. the time which passes after the occurrence of an error until the AO
block assumes the defined error state.
Range of values
Any positive IEEE floating point number:
0 to 3.4 10
38
s
Factory setting
0 s
To Next Page
Loading...
