Endress+Hauser Levelflex FMP53 - Fail safe type

Levelflex FMP51, FMP52, FMP54 Description of device parameters (operating menu)
Endress+Hauser 157
Fail safe type
Navigation
Setup ® Advanced setup ® Analog output 1...4 ® Fail safe type
Description
Defines the output behavior of the AO block in the case of an error.
Options
• Fail safe value
The output assumes the value defined in Fail safe value.
•
Fallback value
The output maintains the value it had at the moment the error occurred.
• Off
The output assumes a value according to the current state of the block. The error is ignored.
Factory setting
Fallback value
Fail safe value
Navigation
Setup ® Advanced setup ® Analog output 1...4 ® Fail safe value
Prerequisite
Only visible for Fail safe type = Fail safe value
Description
Defines the value the output assumes in the case of an error.
Range of values
Any IEEE floating point number:
-3,4 10
38
... + 3,4 10
38
Factory setting
0
Out value
Navigation
Setup ® Advanced setup ® Analog output 1...4 ® Out value
Diagnostics ® Measured value ® Analog output 1...4 ® Out value
Description
Displays the current output value of the block.
Out status
Navigation
Setup ® Advanced setup ® Analog output 1...4 ® Out status
Diagnostics ® Measured value ® Analog output 1...4 ® Out status
Description
Displays the current status of the output value of the block.