Endress+Hauser Micropilot FMR56 - Incoming Acceptance and Product; Identification; Incoming Acceptance; Product Identification

Micropilot FMR56, FMR57 FOUNDATION Fieldbus Incoming acceptance and product identification
Endress+Hauser 17
4 Incoming acceptance and product
identification
4.1 Incoming acceptance
A0015502
DELIVERY NOTE
1 = 2
A0022480
Are the order codes on the delivery
note (1) and the product sticker (2)
identical?
A0016871
A0015502
A0016872
Are the goods undamaged?
A0015502
DELIVERY NOTE
Made in Germany, 79689 Maulburg
A0022491
Do the nameplate data match the
ordering information on the delivery
note?
A0015502
A0022494
Is the DVD with the operating tool
present?
If required (see nameplate): Are the
Safety Instructions (XA) present?
If one of these conditions is not satisfied, contact your Endress+Hauser Sales Center.
4.2 Product identification
The following options are available for identification of the measuring device:
• Nameplate specifications
• Extended order code with breakdown of the device features on the delivery note
• Enter serial numbers from nameplates in W@M Device Viewer
( www.endress.com/deviceviewer ): All information about the measuring device is
displayed.
• Enter the serial number from the nameplates into the Endress+Hauser Operations App
or scan the 2-D matrix code (QR code) on the nameplate with the Endress+Hauser
Operations App: all the information for the measuring device is displayed.