Endress+Hauser Micropilot FMR56 - Measured Values Submenu; Measured Values; Terminal Voltage 1

Operating menu Micropilot FMR56, FMR57 FOUNDATION Fieldbus
180 Endress+Hauser
17.4.4 "Measured values" submenu
Navigation  Diagnostics → Measured val.
Distance
Navigation  Diagnostics → Measured val. → Distance
Description Displays the measured distance D between the reference point (lower edge of the flange or
threaded connection) and the level.
Additional information
D
A0019485
 44 Distance for bulk solid measurements
The unit is defined in the Distance unit parameter (→  127).
Level linearized
Navigation  Diagnostics → Measured val. → Level linearized
Description Displays linearized level.
Additional information The unit is defined by the Unit after linearization parameter →  147.
Terminal voltage 1
Navigation  Diagnostics → Measured val. → Terminal volt. 1
Description Dipslays terminal voltage at the current output.