EasyManua.ls Logo

Endress+Hauser Micropilot FMR56 - Alignment Device for FMR57

Endress+Hauser Micropilot FMR56
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation Micropilot FMR56, FMR57 FOUNDATION Fieldbus
32 Endress+Hauser
2
1
A0018877
1 Parabolic reflector
2 4 bolts; torque: 3 Nm (2,2 lbf ft)
6.3.5 Alignment device for FMR57
Using the alignment device it is possible to tilt the antenna axis by up to 15° in all
directions. The alignment device is used for the optimum alignment of the radar beam
with the bulk solids surface.
Product structure: Feature 100 "Process connection", options XCJ, XEJ, XFJ
±15°
±15°
A0016931
 10 Micropilot FMR57 with alignment device
Align antenna axis:
1. Loosen screws.
2. Align antenna axis (up to. ± 15° in all directions).
3. Tighten screws with 15 Nm (11 lbf ft).

Table of Contents

Other manuals for Endress+Hauser Micropilot FMR56

Related product manuals