Endress+Hauser Mycom CLM 152 Operating Instructions

Start-up / Checklist
Request
see
Chapter
Selection options Factory settings User settings
Language 7.1.5
Language version A: Language version C:
Deutsch, Deutsch,
English, English,
Français, Français
Italiano Nederlands
Japanese
English
LC display
contrast
7.1.5 Set as desired “medium”
Date 7.1.5
Enter
current date
current date
Time 7.1.5
Enter
current time
CET
(not summer time)
Measuring type 7.1.1
Conductivity
Concentration
Resistance (MOHM)
Conductivity
Sensor 7.1.1
Seleciton of Cd-Sensor:
CLS 50
CLS 52
k=0.01/k=0.1/k=1/k=10
CLS 52
Measuring principle
(only for difference
measuring instrument)
7.1.1 Differential measurement (1-circuit or diff.)
Differential
measurement
unit 7.1.1
Select selectable SI units
µS/cm, mS/cm or mS/m, S/m
µS/cm, mS/cm
Temperature sensor 1 7.1.1
Type of temparature sensors
PT 100 / PT 1000 / NTC 30 kΩ
PT 100
Temperature sensor 2
(only for difference)
7.1.1 Type of temparature sensors PT 100
Temperature unit 7.1.5
Unit of temperature
measurement:
Celsius [°C],
Fahrenheit [°F],
Kelvin [K]
Celsius [°C]
Temperature 7.3.2
Selection of temperature compensation:
manual (MTC)
automatic (ATC)
ATC
Compensations
temperature
(only for MTC; MTC 2
only for difference)
7.3.2 –35.0 ... 250.0 °C 25.0 °C
Air set selection
(only for inductive)
11
Suppress air set
Perform air set
Enter air set
Suppress air set
lm152e05.chp
First start-up Mycom CLM 152
Endress+Hauser 25

Endress+Hauser Mycom CLM 152 Specifications

General

Brand	Endress+Hauser
Model	Mycom CLM 152
Category	Transmitter
Language	English