Endress+Hauser Proline Prowirl 73 - Page 115

Proline Prowirl 73 Description of device functions
Endress+Hauser 115
TEST DISPLAY Description
Use this function to test the operability of the local display and its pixels.
Test sequence:
1. Start the test by selecting ON.
2. All pixels of the main line and additional line are darkened for minimum
0.75 seconds.
3. The main line and additional line show an "8" in each field for minimum
0.75 seconds.
4. The main line and additional line show a "0" in each field for minimum
0.75 seconds.
5. The main line and additional line show nothing (blank display) for minimum
0.75 seconds.
6. When the test is completed, the local display returns to its initial state and displays
the option OFF.
Options
OFF
ON
Factory setting
OFF
Function description, USER INTERFACE group