Endress+Hauser Proline Prowirl 73 - Page 157

Proline Prowirl 73 Description of device functions
Endress+Hauser 157
INSTALLATION POINT Prerequisite
The function is only available if WATER DELTA HEAT was selected in the SELECT
FLUID function (ä 143), or if USER DEFINED LIQUID was selected in the SELECT
FLUID function and the DELTA HEAT option was selected in the ENERGY
CALCULATION function.
Description
Use this function to define the installation point of the measuring device (warm side or
cold side). For a detailed description, see ä 148
Options
COLD SIDE
WARM SIDE
Factory setting
WARM SIDE
SATURATED STEAM
PARAMETER
Prerequisite
The function is only available if SATURATED STEAM or SUPERHEATED STEAM was
selected in the SELECT FLUID function (ä 143).
Description
Use this function to specify what parameter should be used to calculate the density and
enthalpy if saturated steam is selected as the fluid.
Options
PRESSURE
TEMPERATURE
Factory setting
TEMPERATURE
Function description, FLOW COMPUTER group