Operation options Waterpilot FMX21
32 Endress+Hauser
7 Operation options
Endress+Hauser offers comprehensive measuring point solutions with display and/or
evaluation units for the Waterpilot FMX21 and TMT182 temperature head transmitter.
Your Endress+Hauser service organization would be glad to be of service if you have
any other questions. Contact addresses can be found on the website at
www.endress.com/worldwide
7.1 Overview of operating options
7.1.1 Operation using Endress+Hauser operating program
The FieldCare operating program is an Endress+Hauser plant asset management tool
based on FDT technology. With FieldCare, you can configure all Endress+Hauser devices as
well as devices from other manufacturers that support the FDT standard.
Hardware and software requirements can be found on the Internet:
www.de.endress.com → Search: FieldCare → FieldCare → Technical Data.
FieldCare supports the following functions:
• Configuration of transmitters in online/offline mode
• Loading and saving device data (upload/download)
• Documentation of the measuring point
Connection options:
• HART via Commubox FXA195 and the USB port of a computer
• HART via FXA520 Fieldgate
• Further information on FieldCare and software download can be found on the
internet (www.de.endress.com ® Downloads ® Text Search: FieldCare).
• Connecting the Commubox FXA195
• As not all internal device dependencies can be mapped in offline operation, the
consistency of the parameters must be checked once again before they are
transmitted to the device.
7.1.2 Operation using Field Xpert SFX
Compact, flexible and robust industrial handheld terminal for remote configuration and for
obtaining measured values via the HART current output or FOUNDATION Fieldbus. For
details, see the Operating Instructions BA00060S/04.
To Next Page
Loading...
