Endress+Hauser Waterpilot FMX21 - 14.10 Expert → Measurement → Sensor Trim

Waterpilot FMX21 Description of device parameters
Endress+Hauser 97
14.10 Expert → Measurement → Sensor trim
Lo trim measured
Write permission No write permissions. Parameter is read only.
Description Displays the reference pressure present to be accepted for the lower calibration point.
Hi trim measured
Write permission No write permissions. Parameter is read only.
Description Displays the reference pressure present to be accepted for the upper calibration point.
Lo sensor trim
Write permission No write permissions. Parameter is read only.
Description Sensor module recalibration by entering a target pressure while simultaneously and
automatically accepting a reference pressure present for the lower calibration point.
Hi sensor trim
Write permission No write permissions. Parameter is read only.
Description Sensor module recalibration by entering a target pressure while simultaneously and
automatically accepting a reference pressure present for the upper calibration point.