Section 2 — Algorithms
ENSONIQ DP/4+ Reference Manual 91
SPEAKER CABINET
Speaker Cabinet simulates the warm sound of an open-back speaker cabinet. Speaker Cabinet is
fabulous for a guitar, bass or any other stringed instrument, and will find much use in the studio
when recording directly to the console. This algorithm contains the resonances and the
nonlinearity of a real musical instrument speaker. Be careful not to overdrive this speaker
cabinet by feeding too hot of a signal from the preceding effect; turn down the volume there and
make up for it with the output gain here.
For a brighter speaker emulation, try using Tunable Speaker.
01 — Mix
02 — Volume
See the descriptions under the Mix and Volume Parameters, in the beginning of this section.
03 — Speaker Output Gain Range: -48 to +24 dB
Since speaker cabinets are “lossy,” output gain is required to compensate losses in perceived
volume. Setting this gain too high will cause clipping of the output signal.
04 — Mod1 Source 08 — Mod2 Source
05 — Mod1 Destination 09 — Mod2 Destination
06 — Mod1 Param Range Min 10 — Mod2 Param Range Min
07 — Mod1 Param Range Max11 — Mod2 Param Range Max
See the descriptions under the Algorithm Modulators earlier in this section.
To Next Page
Loading...
Need help?
General
