ENSONIQ DP/4+ User Manual

Section 1 — Controls & Basic Functions
20 ENSONIQ DP/4+ Reference Manual
Selecting Config Presets
Of the four Preset types, the most powerful is the Config Preset. The Config preset lets you save,
and later recall, the current state of the DP/4+, including all algorithm, signal routing and mixing
information.
Selecting a Config preset will
• Reconfigure the DP/4+ inputs and outputs;
• Change the signal routing between units; and
• Load a new algorithm into each of the four Units.
To select a Config preset
1. Press {SELECT}.
2. If the Config LED is not already on, press {CONFIG}.
3. Move the large silver Data Entry Knob, or press the {<} and {>} buttons. The Select LED
flashes, indicating that you are previewing presets. The display shows the available Config
presets.
4. When the display is showing the preset you want to load, press {SELECT} again. This selects
the preset, and the Select LED stops flashing.
Note: The first 10 ROM Config locations (presets #50 to 60) can be used as “starting
places” for creating your own configurations, and cover common signal routing set-ups.

ENSONIQ DP/4+ Specifications

General

Brand	ENSONIQ
Model	DP/4+
Category	Recording Equipment
Language	English