ENSONIQ DP/4+ User Manual

Section 6 — Presets
ENSONIQ DP/4+ Reference Manual 183
Quick Steps to Hear Presets
Plug your mono sound source into the front panel Input 1 jack, or for stereo into Inputs 1 and 2 on
the back of the DP/4+. Connect Output 1 (and Output 2 for stereo) to an audio source (amplifier,
mixing board, etc), or plug headphones into the front panel Phones jack. If you don’t hear any
sound, set all Input and Output Knobs to a 12 o’clock position, and adjust the Input Knob levels
as needed.
To Select 1 Unit Presets:
1. Press the {SELECT} button, then the {CONFIG} button.
2. Turn the Data Entry Knob until the screen shows “52 Select 1U Psets.”
3. Press the {SELECT} button, then the unit {A} button.
4. Turn the Data Entry Knob to display the names of the different 1 Unit presets.
5. Press the {SELECT} button to hear the preset on the display.
6. To select other 1 Unit Presets, turn the Data Entry Knob and press {SELECT} whenever you
see a Preset you’d like to hear.
To Select 2 Unit Presets:
1. Press the {SELECT} button, then the {CONFIG} button.
2. Turn the Data Entry Knob until the screen shows “51 Select 2U Psets.”
3. Press the {SELECT} button, then the unit {A} button.
4. Turn the Data Entry Knob to display the names of the different 2 Unit Presets.
5. Press the {SELECT} button to hear the preset on the display.
6. To select other 2 Unit Presets, turn the Data Entry Knob and press {SELECT} whenever you
see a preset you’d like to hear.
To Select 4 Unit Presets:
1. Press the {SELECT} button, then the {CONFIG} button.
2. Turn the large silver Data Entry Knob until the screen shows “50 Select 4U Psets.”
3. Press the {SELECT} button, then the unit {A} button.
4. Turn the Data Entry Knob to display the names of the different 4 Unit Presets.
5. Press the {SELECT} button to hear the preset on the display.
6. To select other 4 Unit Presets, turn the Data Entry Knob and press {SELECT} whenever you
see a preset you’d like to hear.
To Select Config Presets:
1. Press the {SELECT} button, then the {CONFIG} button.
2. Turn the Data Entry Knob to display the names of the different Config Presets.
3. Press the {SELECT} button to hear the preset on the display. Remember that Config Presets
dictate how the inputs, outputs, and units are routed together. You may have to rearrange
your cables/routings in order to hear certain presets correctly.
4. To select other Config Presets, turn the Data Entry Knob and press {SELECT} whenever you
see a preset you’d like to hear.

ENSONIQ DP/4+ Specifications

General

Brand	ENSONIQ
Model	DP/4+
Category	Recording Equipment
Language	English