ENSONIQ DP/4+ User Manual

Section 1 — Controls & Basic Functions
18 ENSONIQ DP/4+ Reference Manual
About System•MIDI Mode
In System•MIDI mode, you can edit unit-specific MIDI parameters, and parameters which are
system-wide, or “global.” The System•MIDI parameters (such as MIDI channels, Controllers,
and program change maps) do not change when you select different presets and configs.
For specific information about the System•MIDI parameters, see Section 4 — System•MIDI.
To enter System•MIDI mode, press the {SYSTEM"MIDI} button. The display shows:
Parameter Number Parameter Name
m m
54
Preset Memory
Protect=Off
i
Parameter range which can be selected and adjusted
• The red LED display (on the left) shows the number of the currently selected parameter.
There are 67 parameters in this mode.
• The LCD display (on the right) shows one or more parameters, which can be selected and
adjusted. The currently selected parameter will always be flashing.
• The {<} and {>} buttons scroll through the different parameters. Use them to select the
parameter you want to change.
• The Data Entry Knob changes the value of the selected parameter.
Tip: Though you can scroll continuously through all 67 System•MIDI parameters
using the {<} and {>} buttons, this might get tedious; you can use the following
shortcuts to get close to the parameter(s) you desire:
• After pressing {SYSTEM"MIDI}, press {A}, {B}, {C}, {D}, or {CONFIG} to go to unit-specific
MIDI parameters relating to them.
• Press {SYSTEM"MIDI} repeatedly to go directly to several convenient locations within the
remaining parameter list. Then scroll to the parameter you want.

ENSONIQ DP/4+ Specifications

General

Brand	ENSONIQ
Model	DP/4+
Category	Recording Equipment
Language	English