EasyManuals Logo

ENSONIQ DP/4+ User Manual

ENSONIQ DP/4+
199 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
Section 5 — Storage
8 ENSONIQ DP/4+ Reference Manual
MIDI System Exclusive Storage
Sending MIDI Sys-Ex Messages to another DP/4+ or to a Storage Device
The DP/4+ is able to send System Exclusive (Sys-Ex) dumps of presets, either singly or in banks,
as well as dumps containing all of the system parameters. These dumps can be directly
transmitted to another DP/4+, or can be recorded by an external device which has MIDI Sys-Ex
Recorder capabilities (such as the ENSONIQ TS-10, TS-12 or ASR-10) to be stored and later
retransmitted to the DP/4+.
If you need more specific details on the messages, please refer to the DP/4+ MIDI System Exclusive
Specification available from ENSONIQ (see the Appendix for information on how to obtain this
document).
To Send DP/4+ Data Out via MIDI System Exclusive Dump
1. Press {SYSTEM"MIDI}.
2. Press the {WRITE} button at any time while in System•MIDI mode to engage the system
exclusive dump utility. The display looks something like this:
00
SysExDump 4 Unit
Preset Number01
This two-parameter page allows you to select and send various kinds of MIDI System Exclusive
dump messages from the DP/4+. When you first enter this page, the dump type defaults to the
single preset belonging to the currently active unit, whose preset type and number are displayed.
The first parameter allows you to select which type of dump you wish to send.
The second parameter on this screen is only available when the first parameter is set to 1 Unit, 2
Unit, 4 Unit, or Config. It allows you to use the Data Entry Knob to select an individual preset
(numbers 00 through 49) to transmit. If you rotate past 49, you can set the parameter to “Bank”
which will dump the entire bank of the indicated preset type.
The Available System Exclusive Dumps in the DP/4+ are:
Dump Types: Display shows: What’s included:
Single 1-Unit Preset SysExDump 1 Unit
Preset Number<00>
Single 1-Unit RAM preset
<00 to 49>
1-Unit Preset Bank SysExDump 1 Unit
Preset Bank
50 1-Unit RAM presets
Single 2-Unit Preset SysExDump 2 Unit
Preset Number<00>
Single 2-Unit RAM preset
<00 to 49>
2-Unit Preset Bank SysExDump 2 Unit
Preset Bank
50 2-Unit RAM presets
Single 4-Unit Preset SysExDump 4 Unit
Preset Number<00>
Single 4-Unit RAM preset
<00 to 49>
4-Unit Preset Bank SysExDump 4 Unit
Preset Bank
50 4-Unit RAM presets

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ENSONIQ DP/4+ and is the answer not in the manual?

ENSONIQ DP/4+ Specifications

General IconGeneral
BrandENSONIQ
ModelDP/4+
CategoryRecording Equipment
LanguageEnglish

Related product manuals