ENSONIQ DP/4+ User Manual

Section 2 — Algorithms
ENSONIQ DP/4+ Reference Manual 35
06 — Tremolo Sample & Hold Rate Range: Off, 001 to 100
Controls the sample rate of a sample and hold network applied to the LFO within the tremolo.
When in “Hold,” the effect will be to fix the instantaneous amplitude (if the depth is not 00). A
setting of 001 will have the largest space between holds. Lower settings create a staccato effect,
whereas higher values will increase the amount of samples, making the tremolo flow more
smoothly. This parameter can also be turned off.
07 — Tremolo Left Delay Time Range: 0 to 1500 ms
This parameter controls the time delay for the left channel regen delay, independent of the
tremolo effect.
08 — Tremolo Right Delay Time Range: 0 to 1500 ms
This parameter controls the time delay for the right channel regen delay.
09 — Tremolo Delay Regen Range: -99 to +99
Controls the amount of regen applied to the delay time taps. The sign of the value determines
the polarity of the regen. A value of +00 will eliminate the audible delay.
10 — Tremolo Left Echo Time Range: 0 to 1500 ms
Controls the tremolo echo time for the left side. Higher settings yield a slower echo.
11 — Tremolo Right Echo Time Range: 0 to 1500 ms
This parameter controls the tremolo echo time for the right side.
12 — Tremolo Echo Level Range: 00 to 99
Controls the volume of the discrete echo for both the left and right sides.
13 — Bass Fc Range: 0 to 1000 Hz
Selects the cutoff frequency of the low EQ.
14 — Bass EQ Gain Range: -48 to +24 dB
Sets the amount of boost or cut applied to the low EQ.
15 — Treble Fc Range: 01KHz to 16KHz
Selects the cutoff frequency of the high EQ.
16 — Treble EQ Gain Range: -48 to +24 dB
Sets the amount of boost or cut applied to the high EQ.
17 — EQ Input Level Trim Range: -24 to +00 dB
Adjusts the input volume to the EQs to prevent clipping boosted signals.
18 — Mod1 Source 22 — Mod2 Source
19 — Mod1 Destination 23 — Mod2 Destination
20 — Mod1 Param Range Min 24 — Mod2 Param Range Min
21 — Mod1 Param Range Max25 — Mod2 Param Range Max
See the descriptions under the Algorithm Modulators in the beginning of this section.

ENSONIQ DP/4+ Specifications

General

Brand	ENSONIQ
Model	DP/4+
Category	Recording Equipment
Language	English