ENSONIQ DP/4+ User Manual

Section 2 — Algorithms
ENSONIQ DP/4+ Reference Manual 41
FLANGER
Flanger is a fat digital flanger. The DP/4+ offers two different flanger algorithms. This flanger
has deeper notches and requires less feedback than the EQ-Flanger-DDL algorithm.
01 — Mix
02 — Volume
See the descriptions under the Mix and Volume Parameters, in the beginning of this section. The
flange depth can be changed somewhat by changing the Mix level.
03 — Flanger LFO Rate Range: 00 to 99
This parameter controls the rate of modulation of the flanger notches.
04 — Flanger LFO Width Range: 00 to 99
Controls the range of the high to low frequency sweep about the flanger center in the flanger
effect.
05 — Flanger Center Range: 00 to 99
This parameter controls the sweep center of the flanger effect.
06 — Flanger Regen Range: -99 to +99
Controls the amount of feedback applied from the output to the input of the flanger. The sign of
the value determines the polarity of the feedback.
07 — Mod1 Source 11 — Mod2 Source
08 — Mod1 Destination 12 — Mod2 Destination
09 — Mod1 Param Range Min 13 — Mod2 Param Range Min
10 — Mod1 Param Range Max14 — Mod2 Param Range Max
See the descriptions under the Algorithm Modulators in the beginning of this section.

ENSONIQ DP/4+ Specifications

General

Brand	ENSONIQ
Model	DP/4+
Category	Recording Equipment
Language	English