ENSONIQ DP/4+ User Manual

Section 2 — Algorithms
ENSONIQ DP/4+ Reference Manual 83
09 — Rotating Speaker Distortion Tone Range: 000 to 127
This parameter is the distortion tone control. High settings will yield a more raspy distortion
tone, whereas mid settings will give that “amp growl.” When this parameter is set to 000, there is
no distortion.
10 — Rotating Speaker Stereo Spread Range: 00 to 99
Controls the apparent width of the stereo image created by the rotating speaker effect. A setting
of 99 yields a right to left synthetic stereo spread, a setting of 00 yields a left to right synthetic
stereo spread, and a setting of 50 yields a mono signal.
11 — Mod1 Source 15 — Mod2 Source
12 — Mod1 Destination 16 — Mod2 Destination
13 — Mod1 Param Range Min 17 — Mod2 Param Range Min
14 — Mod1 Param Range Max18 — Mod2 Param Range Max
See the descriptions under the Algorithm Modulators in the beginning of this section.

ENSONIQ DP/4+ Specifications

General

Brand	ENSONIQ
Model	DP/4+
Category	Recording Equipment
Language	English