Enterasys SecureStack C2 C2G170-24 - Appendix A: Specifications; Switch Specifications; Console Port Pinout Assignments

SecureStack C2 Installation Guide A-1
A
Specifications
Thisappendixprovidesinformationaboutthefollowing:
Enterasys N etworksreservestherighttochangethespecific ationsatanytimewithout
notice.
Switch Specifications
Table A‐1providestheI/Oports,processorsandmemory,physical,andenvironmental
specificationsfortheC2G170‐24.
For information about... Refer to page...
Switch Specifications A-1
Mini-GBIC Input/Output Specifications A-2
Console Port Pinout Assignments A-6
Regulatory Compliance A-6
Table A-1 Switch Specifications
Item Specification
C2G170-24
SFP port slots 1 through 24 Twenty-four, Mini-GBIC port slots for 10/100/1000 Mbps Ethernet
over copper RJ45 connections with auto-sensing and auto-
negotiation and/or 1000 Mbps fiber-optic SC/LC connections
depending on the Mini-GBICs installed. Refer to “Mini-GBIC
Input/Output Specifications” on page A-2 for a list of Mini-GBICs.