Epson Aculaser C9200N - Page 112

EPSON AcuLaser C9200N Revision D
Troubleshooting Service Call Error 112
Confidential
 Controller Related Error
C H E C K
P O I N T
Sort code “C” is displayed as “D” depending on the module
that detects errors on the hardware. In this case, read “D” as
“C” and execute the troubleshooting procedure.
Table 3-17. Error Code List
Sort Error Code Description Reference
C 0000-0799 CPU error
Controller
Related Error
(p129)
C 0800 IPL error (controller defect)
C 0998 Engine communication error (only when power-on)
C 0999 Engine flash ROM has no program data
C 1000 Standard RAM error (not installed, etc.)
C 1001 Standard RAM error (standard stack is undefined, etc.)
C 1002 Standard RAM error (standard size is undefined, etc.)
C 1003 Optional RAM error
C 1010 Verification error
C 1021 RAM error (slot 1)
C 1100 ROM checksum error (font)
C 1101 ROM checksum error (font)
C 1110 ROM checksum error (font)
C 1111 ROM checksum error (font)
C 1120 ROM checksum error (program)
C 1121 ROM checksum error (program)
C 1122 ROM checksum error (program)
C 1123 ROM checksum error (program)
C 1200 EEPROM writing error
C 1210 EEPROM writing times limit
C 1300 RTC error
C 1400 Engine initialization error
Controller
Related Error
(p129)
C 1500 CCNV hardware error
C 1550 Initialization hardware error for SRAM for compression
C 1600 Video series hardware error
C 1610 Video series hardware error
C 1700 Loopback test of network board
C 1702 Network board uninstalled
C 1710 Token Ring hard ware error
C 1800 SPD of DIMM error
C 1999 Other hardware errors
C 2000 Software error
Table 3-17. Error Code List
Sort Error Code Description Reference