Epson Aculaser C9200N - Page 172

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 172
Confidential
Dust Filter
C H E C K
P O I N T
The dust filter is included in the Transfer unit, and the filter should be replaced with
other parts in the Transfer unit at the same time.
IF the Duplex unit is mounted, remove it.
1. Remove the Dust Filter [1].
C1
[1]
Feed Roller (Standard Cassette)
C H E C K
P O I N T
The separation roller should be replaced, whenever the feed roller is replaced.
1. Slide out the standard paper cassette.
2. Lock the paper lifting plate [1] into position.
3. Snap off the C-clip [2] from the feed roller assy [3].
4. Remove the shaft for the feed roller assy [3] from the front bushing.
D1
[1]
[2]
[3]