Epson Aculaser C9200N - Page 173

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 173
Confidential
5. Snap off the C-clip [4], one collar [5] and remove the Feed Roller [6].
A D J U S T M E N T
R E Q U I R E D
When installing the Feed Roller with a new one, make sure to reset the life counter.
(Refer to Chapter 5 “ADJUSTMENT”) (p313))
[4]
[5]
[6]
Separation Roller (Standard Cassette)
C H E C K
P O I N T
The pickup roller should be replaced, whenever the separation roller is replaced.
1. Slide out the standard paper cassette.
2. Remove two Screws [1] and the Separation Roller ounting bracket assy [2].
E1
4038F2C002DB
[1]
[2]