Epson Aculaser C9200N - Page 220

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 220
Confidential
Separation Roller (MP tray)
C H E C K
P O I N T
The pickup roller should be replaced, whenever the separation roller is replaced.
1. Remove the Screw [1], and remove the Ground terminal [2].
2. Remove the Screw [3], and remove the separation roller assy [4].
E3
[1]
4038F2C009DA
4038F2C010DA
[3]
[2]
[4]
3. Snap off the C-clip [5], and remove the spring [6] and the guide plate [7]. Remove the
Separation Roller [8].
4038F2C502DA
[5]
[7]
[6]
[8]