Epson Aculaser C9200N - Page 237

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 237
Confidential
6. Remove two Harnesses [12] from four Wire Saddles [11].
[10]
[11]
[11]
[12]
[12]
4038F2C122DA
7. Remove eight Screws [13], and remove the Transport Drive Assy [14].
C H E C K
P O I N T
Screws [13] secure the Transfer Drive Assy are shown by △ mark.
Never remove the Screws other than shown by △ mark.
[13]
[13][14]
4038F2C123DA
C H E C K
P O I N T