Epson Aculaser C9200N - Page 238

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 238
Confidential
Fusing Unit
Before replacing the Fusing Unit, ensure that it has had time to cool down.
1. Turn OFF the Main Power Switch and unplug the power cord from the power outlet, then
wait for about 20 minutes.
2. Open the Front Door.
3. Remove two Claws [1], and remove the Exit Tray Connector protective cover [2].
4. Disconnect the Connector [3].
C6 D6
4039F2C011DA
4039F2C010DA
[1]
[2]
[3]
5. Remove the Screw [4], and remove the Connector protective cover [5].
6. Disconnect two Connectors [6].
4039F2C012DA
[4]
[5]
4039F2C013DA
[6]